Electromechanical

Spin, turn & twist with Jameco's wide selection of DC motors. These little direct current motors pack a big punch and can attach to anything. Choose from 3 volt dc motors, 12 volt, 6 volt and more. DC motors can be used in a variety of applications such as medical, industrial automation, instrumentation and security.

Features

• Nominal voltage: 12 VDC

• Voltage range: 3 - 12VDC

• Current @ maximum efficiency: 0.168A

• Speed @ maximum efficiency: 4570 RPM

• Torque @ maximum efficiency: 29.08 g-cm

• Efficiency: 69.4%

• Terminal type: 0.08" solder tabs

• Smooth shaft

• Shaft diameter: 0.0787" (2 mm)

• Shaft length: 0.354"

• Size: 0.960" diameter x 1.213" depth

• Screw Mount Dimensions: M3.0 X 0.5

Specifications

• Manufacturer:Jameco ValuePro

• Manufacture#: IG-406D-2341

• Voltage/Current: 125VAC/4A, 250VAC/2A

• 2-Position key removal, marked 2341, SPST

• Number of Flats: 2

• Diameter x Length: 0.66" x 1.46"

• Terminal: 0.25" quick connect/disconnect

• Does not comply with ISO 8846 or SAE J1171 ignition protection standard

• All keys are keyed alike

Tactile Switch

Features:

SPST OFF-(ON)

Contact rating: 20mA @ 12VDC

Bounce time: 10 msec.

4-pin package

Button color: Black

Note: (ON) denotes momentary ON

The A1302 is a continuous-time, ratiometric, linear Hall-effect sensor ICs. It is optimized to accurately provide a voltage output that is proportional to an applied magnetic field. These devices have a quiescent output voltage that is 50% of the supply voltage. Output sensitivity is 1.3 mV/G typical for the A1302.

Features

Operating Supply Voltage: 4.5V to 6.0V

Output Current: 10mA

Low-noise output

Fast power-on time

Ratiometric rail-to-rail output

Solid-state reliability

Factory programmed at end-of-line for optimum performance

Robust ESD performance

Operating Temp Range -40 C to 125 C

This gearmotor consists of a low-power, 12 V brushed DC motor combined with a 377.93:1 metal spur gearbox. The gearmotor is cylindrical and has a diameter shy of 25 mm, and the D-shaped output shaft is 4 mm diameter and extends 12.5 mm from the face plate of the gearbox.

Specifications

• Rated Voltage: 12 VDC

• Brush Type: Low Power

• Stall Current: 0.9 A

• No Load Current: 50 mA w/o encoder, 60 mA with encoder

• No Load Speed: 15 rpm

• Stall Torque (extrapolated): 23 kg-cm (320 oz-in)

• Max Power: n/a

• Gear Ratio: 378:1

• Size: 25x30.8mm diameter body + 27mmL gearbox

• 4mm D-shaft (2.5mm to flat) (10 mm L)